Tag: pro audio equipment

New York Times sports reporter dies after crash

The New York City Times sports editor who was hit by a bus and died on Sunday morning has died.

Steve Stotz, 58, was hit in the head by the vehicle during a protest in the city, a source told CNN affiliate WCBS.

Stotz was an anchor for the station, and he was in the newsroom at the time of the accident.

He was working for the paper as an associate editor for more than 30 years.

The accident occurred in front of the Times’ offices on the Upper East Side.

Stots family said they were still gathering information, and that they would release more details on Sunday night.

The incident happened shortly after 9 a.m. on Sunday as the protest was taking place outside of the offices of the New York Post, the newspaper of record.

The driver, who is believed to have been wearing a mask, was being escorted from the scene by police.

He was taken to Bellevue Hospital, where he was pronounced dead at 1:24 p.m., the New Jersey State Police said.

The police chief said the driver was wearing a helmet, a face shield and gloves, but did not say what type of protective equipment he was wearing.

The driver also did not appear to be wearing a face mask, the New Yorker said.

Stott was a longtime sports reporter for the New England Patriots.

The paper reported that StotZs family said he had been covering football for the past five years, but his previous coverage focused on sports and the Olympics.

The New York Police Department said Stotzes death was being investigated as a homicide.

How to install a commercial kitchen on your roof

The following article is not an endorsement of products or services mentioned in the article.

However, it does cover the installation and use of commercial kitchen equipment.

To see the most recent article on this topic, visit our article on how to install commercial kitchen appliances.

Before installing a commercial space heater, it’s important to make sure the unit can be easily accessed from the inside and out.

To that end, we recommend checking with your building or building inspector.

If the unit has a hard-wired or wired-on plug, you’ll need to hook it up to the power outlet, a wall outlet or a power supply.

If you have access to a wall or ceiling outlet, you may also need to use a ceiling fan to blow air into the unit.

A commercial kitchen requires a range of tools, so it’s essential to choose the right equipment.

You can choose from the following:1.

Hookup cables: To hook up the unit to a power outlet or wall outlet, use a 1-foot (30 cm) wide hookup cable or a small extension cord to hook up to an outlet, such as an outlet outlet or garage wall outlet.

A 1- to 1.5-foot-long (36 to 80 cm) length of hookup wire can be used to connect the unit’s electrical outlets.

You may also want to consider hooking up a wall-mounted power cord to your commercial kitchen, as these units can be mounted directly on the wall.2.

Hook up outlets: You can use any standard-length outlet, including a wall plug, ceiling outlet or even a small, high-power outlet.

Some commercial kitchen units also have an outlet on the ceiling.3.

Power supply: This is the main component of any commercial kitchen.

A power supply is an electrical device that supplies power to the unit, such like a wall socket or a wall transformer.

You’ll also need an outlet to hook the power up to your power supply, such in a garage or in your home.

The standard length of power cord can be a 1/4-inch (12 mm) long to plug into a wall, ceiling or a ceiling.

You should also be sure that your power outlet can be disconnected from your home’s electrical grid.4.

Door plug: You may choose to use an electric door plug, as this type of unit can connect to your existing electric or natural gas network.

However with electric doors, you can’t connect them directly to your home or utility lines.

Instead, you need to connect them to the nearest electric or gas company.

The plug should be at least 2 feet (610 mm) from the wall and at least 1 foot (30 mm) off the floor.

A wall plug is designed to connect to a home’s power system, which usually consists of an electric company or a residential electric utility.

The electric company can charge the power unit’s battery, and the residential utility can disconnect the power from the power line.

However if the power is connected to a utility’s network, it can be charged or disconnected remotely.

In addition, a commercial commercial kitchen may also have a switch that can be attached to the back of the unit that allows you to turn the unit off and on remotely.

If this happens, you should have the unit disconnected from the home’s electric grid before you install the commercial kitchen unit.

To connect your commercial appliance to your utility, you will need to contact your local utility, as well as your utility’s office or power company.

Depending on your utility and the type of appliance, you might also need the appropriate electrical and plumbing code to be installed in the home.

If these codes are required, you could also need a contractor to help you with the installation.

For commercial kitchen use, a common problem is wiring issues.

You might be wondering, how do I know if the appliance I’m considering for my commercial kitchen has the correct wiring to my commercial house?

To find out, first determine whether or not the unit meets your building’s electrical and electrical code requirements.

If your home does not have a building code, contact your building inspector to verify that your building meets building codes.

If you have a question about installing commercial kitchen appliance, we suggest consulting with your builder, who will be able to help with the purchase of the equipment.